Skip to main content

Organic light-emitting diodes and photodetectors

Organic light-emitting diodes (OLEDs) are used as energy-efficient light-emitting units e.g. for displays and lighting.  Likewise, organic semiconductors can function as the light-absorbing layer in sensitive photodetector devices. Among the appealing features of organic materials for light-emitting and photodetector devices are their relative ease of processing combined with the possibility of tuning the emission or absorption spectrum via chemical synthesis of molecular building blocks with the desired characteristics. Moreover, their mechanical properties can enable the realization of mechanically flexible devices. In addition, some types of organic small-molecules can self-assemble into crystalline nanofibers with additional features. At NanoSYD, we investigate how we can realize organic thin-film materials with optimized properties and how we can implement these into devices with high performance. More specifically, the research topics are:

  • Flexible/stretchable OLEDs
  • Hybrid/organic photodetector devices
  • In-situ and in-operando characterization of organic thin-films and devices
  • Techniques for integration of organic nanofibers into devices
    • Roll-printing
    • In-situ growth
    • Nanostenciling
    • Top-contact lamination
  • Electrically stimulated light-emission from nanofibers


Flexible/stretchable OLEDs

Bendable OLED devices can be realized by fabricating the OLED layer stack on top of a flexible substrate – typically some type of plastic film or ultrathin glass. The fabrication of a stretchable device is, however, more challenging since most of the materials used in OLED devices can only tolerate very limited stretching before breaking. At NanoSYD, we are working on the development of a new type of stretchable devices towards a stretchable OLED display. This is based on a substrate with specially designed surface corrugations. When the substrate is stretched, these corrugations flatten out but the surface itself only bends. This will enable an OLED device that can be installed on arbitrary 3-dimensional surfaces and objects. This is complemented by device simulations that provide input to experimental investigations. 

Hybrid/organic photodetector devices

By combining organic semiconductors with other material classes, it is possible to realize hybrid device structures with improved properties. For example, organic semiconductors can exhibit strong optical absorption, which, combined with low price and large area processability, makes these materials useful for photodetector applications. However, their typically moderate electrical transport properties impede the realization of very fast photodetectors. This can be remedied by a hybrid device structure combining the organic semiconductor with e.g. graphene, which has superior electrical transport properties. At NanoSYD, we work on the develop and investigate photodetector devices based on both hybrid material combinations as well as pure organic semiconductor materials. In particular, we investigate how we can control the microscopic structure of the organic semiconductor material during the thin-film deposition process in order to achieve, e.g., maximum optical absorption, and how this translates into improved device performance.


In-situ and in-operando characterization of organic thin-films and devices 

In order to realize organic thin-film devices with optimum performance, it is necessary to control the thin-film microstructure to obtain e.g. a certain molecular alignment and orientation. The material microstructure is formed during the thin-film deposition process and is influenced by a range of parameters related to the substrate, the thin-film material as well as the deposition process itself. Moreover, once the thin-film has been formed and the thin-film device has been realized, further structural and chemical changes can occur, which potentially leads to a degradation of device performance. At NanoSYD, we use In-situ techniques to study the thin-film formation process in order to elucidate how the various parameters influence the resulting microstructure and use this knowledge to realize devices with high performance. Moreover, In-operando techniques are used to investigate microscopic changes occurring in the device materials during operation to minimize these effects and realize more stable devices. These techniques include grazing-incidence X-ray diffraction as illustrated in the figure below.


Techniques for the integration of organic nanofibers into devices

When organic films based on small molecules are used in devices, they are typically deposited onto the device substrate by physical vapor deposition. However, the crystalline nanofibers are formed only on specific surfaces that are typically unsuited for further processing, and special techniques for their integration into devices therefore needs to be developed. One technique relies on the initial growth of an array of nanofibers on a muscovite mica substrate and subsequent transfer onto a device substrate via roll-printing. The process is illustrated in the figure below, on which panel (a) shows the array of nanofibers prior to transfer, panel (b) shows the principle of the roll-printing method, and panel (c) shows the nanofiber array after transfer. Afterwards, electrical contact can be established by electrode material deposition through a nanostencil as shown in panel (d), while panel (e) and (f) show the contacted nanofibers observed with a fluorescence and white-light microscope, respectively.


roll-printing transfer


An alternative integration technique uses a gold surface as the substrate for nanofiber self-assembly. On this surface, there is no epitaxial relation between the surface and the nanofibers and there is consequently no well-defined growth direction. However, if artificial pinning structures are realized on/in the gold surface, these can act as nucleation centers for the nanofiber growth and thereby steer the growth direction to enable, e.g. the growth between two closely spaced gold electrodes. Finally, we also study an alternative way of top contact deposition that do not rely on direct evaporation, but rather uses an elastomeric substrate on which a set of contacts is made via nanostenciling. Subsequently this substrate can be laminated onto the organic material to establish the electrical contact.


Electrically stimulated light-emission from nanofibers

By stimulating an organic nanofiber-transistor with an AC voltage, localized light emission can be observed from the metal-organic nanofiber interfaces. This is the results of sequential injection of holes and electrons into the nanofiber and the subsequent electron-hole recombination leading to photon emission. The emission color is determined by the electronic band gap of the nanofiber material, and multicolor light- emission can therefore be achieved by integrating two different types of nanofibers with different fluorescence spectra onto the same transistor platform. The figure below shows emission from two different nanofibers as an overlay between the electrically stimulated light (grayscale) and a fluorescence microscope images from which the actual color can be seen.



NanoSYD members working within the research area

Jakob Kjelstrup-Hansen, Associate Professor
Mathias Huss-Hansen, Postdoc
Jes Linnet, PhD student
Cecilie Clausen Fynbo, PhD student
Mads Nibe Larsen, PhD student
Mark Landsperg Hempel, Master student
Tobias Schiby, Bachelor student
Simon Bruhn Hansen, Bachelor student
Thomas Mastrup Hansen, Bachelor student
Simon Valsøe Wadowski, Bachelor student


Funded projects

Development of near-infrared photodetectors for industrial applications using epitaxial growth of organic ultrathin films on 2-dimensional templates (HEXAGONAL), Independent Research Fund Denmark | Technology and Production Sciences, Research Project, 2021-2024.

The Stretchable OLED display, Innovation Fund Denmark, Industrial PhD project in collaboration with Polyteknik A/S, 2020-2023.

Methodologies for Hyperspectral Thermal Imaging, Innovation Fund Denmark, Industrial PhD project in collaboration with Newtec Engineering A/S, 2018-2021

Selected publications

Structural Effects of Electrode Proximity in Vacuum-Deposited Organic Semiconductors Studied by Microfocused X-Ray Scattering, M. K. Huss-Hansen, J. Kjelstrup-Hansen and M. Knaapila, Advanced Engineering Materials (2021)

Early-stage growth observations of orientation-controlled vacuum-deposited naphthyl end-capped oligothiophenes, M. K. Huss-Hansen, M. Hodas, N. Mrkyvkova, J. Hagara, P. Nadazdy, M. Sojkova, S. O. Høegh, A. Vlad, P. Pandit, E. Majkova, P. Siffalovic, F. Schreiber, J. Kjelstrup-Hansen and M. Knaapila, Physical Review Materials, 5 (2021) 053402

Work function difference of naphthyl end-capped oligothiophene in different crystal alignments studied by Kelvin probe force microscopy, M. N. Larsen, M. S. Peters, R. Lemos-Silva, D. A. da Silva Filho, B. Jørgensen, O. Albrektsen and J. Kjelstrup-Hansen, Organic Electronics 89 (2021) 106060

Photo-induced and electrical degradation of organic field-effect transistors, P. P. Cielecki, T. Leißner, M. Ahmanpour, M. Madsen, H.-G. Rubahn, J. Fiutowski and J. Kjelstrup-Hansen, Organic Electronics 82 (2020) 105717

Surface-Controlled Crystal Alignment of Naphthyl End-Capped Oligothiophene on Graphene: Thin-Film Growth Studied by In Situ X-ray Diffraction, M. K. Huss-Hansen, M. Hodas, N. Mrkyvkova, J. Hagara, P. Siffalovic, B. B. E. Jensen, A. Osadnik, A. Lützen, E. Majková, F. Schreiber, L. Tavares, J. Kjelstrup-Hansen and M. Knaapila, Langmuir, 36/8 (2020) 1898

Structural evaluation of 5,5'-bis(naphth-2-yl)-2,2'-bithiophene in organic field-effect transistors with n-octadecyltrichlorosilane coated SiO2 gate dielectric, A. Lauritsen, M. Torkkeli, O. Bikondoa, J. Linnet, L. Tavares, J. Kjelstrup-Hansen and M. Knaapila, Langmuir 34/23 (2018) 6727

Transparent and conductive electrodes by large-scale nano-structuring of noble metal thin-films, J. Linnet, A. R. Walther, C. Wolff, O. Albrektsen, N. A. Mortensen, and J. Kjelstrup-Hansen, Optical Materials Express, 8/7 (2018) 1733

Laser-induced charge separation in organic nanofibers: A joint experimental and theoretical investigation, L. Tavares, Y. Liu, D. Behn, J. Siebels, T. Kipp, A. Mews, and J. Kjelstrup-Hansen, Organic Electronics, 53 (2018) 20

Structural stability of naphthyl end-capped oligothiophenes in organic field-effect transistors measured by grazing-incidence X-ray diffraction in operando, M. K. Huss-Hansen, A. E. Lauritzen, O. Bikondoa, M. Torkkeli, L. Tavares, M. Knaapila and J. Kjelstrup-Hansen, Organic Electronics, 49 (2017) 375

Enhanced photoresponsivity in organic field effect transistors by silver nanoparticles, J. Linnet, A. R. Walther, O. Albrektsen, L. Tavares, R. L. Eriksen, P. B. W. Jensen, A. Osadnik, S. Hassing, A. Lützen, and J. Kjelstrup-Hansen, Organic Electronics, 46 (2017) 270

Multicolor nanofiber based organic light-emitting transistors, P. B. W. Jensen, J. Kjelstrup-Hansen, and H.-G. Rubahn. Organic Electronics 14 (2013) 3324

Localized and guided electroluminescence from roll printed organic nanofibres, L. Tavares, J. Kjelstrup-Hansen and H.-G. Rubahn. Nanotechnology, 23/42 (2012) 425203

Efficient Roll-On Transfer Technique for Well-Aligned Organic Nanofibers, L. Tavares, J. Kjelstrup-Hansen, and H.-G. Rubahn, Small 7/17 (2011) 2460

AC-biased organic light-emitting field-effect transistors from naphthyl end-capped oligothiophenes, X. Liu, I. Wallmann, H. Boudinov, J. Kjelstrup-Hansen, M. Schiek, A. Lützen, and H.-G. Rubahn, Organic Electronics, 11 (2010) 1096

Mads Clausen Institute University of Southern Denmark

  • Alsion 2
  • Sønderborg - DK-6400
  • Phone: +45 6550 1690
  • Fax: +45 6550 1635

Last Updated 09.09.2022